EW-7679WAC

snowflake premium website template

Description

The EW-7679WAC is a highly-reliable industrial wall-mount wireless access point designed to extend wireless network coverage for enterprise users. With the latest wireless 802.11ac technology for improvements in the speed, reliability and quality of wireless communications, the EW-7679WAC provides simultaneous operation in both 2.4GHz and 5GHz wireless coverage for maximum flexibility. Three detachable high gain antennas with 27.5dBm maximum power transmission provide larger wireless coverage for your environment. The solid capacitors used in the EW-7679WAC guarantees safety for long term usage. Power Saving function not only saves the power consumption of the access point but also saves the power of battery for connected mobile devices. Additionally, the EW-7679WAC features two gigabit LAN ports. One is for 802.3at Power over Ethernet and another one is 802.3af PSE power which can power up another access point or IP Camera.

Product Spec

  • HARDWARE SPECIFICATIONS

    MCU/RF

    Qualcomm Atheros QCA9558 (2.4GHz) + QCA9880 (5GHz)

    PHY

    Qualcomm Atheros AR8033 and AR8035

    Memory

    DDR2 128MB

    Flash

    16MB

    Physical Interface

    -DC Power Jack
    -LAN : 2 x 10/100/1000 Gigabit Ethernet with PoE support 802.3at (LAN 1) + 802.3af PSE Out (LAN 2)
    -USB2.0 interface
    -Eject Button (USB eject)
    -RJ45 Console port
    -Reset / WPS Button               
    -Power On / Off Switch

    Power Requirement

    Power over Ethernet, IEEE 802.3at
    DC : 12V / 4A

    Antenna

    3 x External Dipole Detachable 2dBi Dual Band Antenna

    Others

    Internal Buzzer (Find me)

    RF SPECIFICATIONS


    Wireless Standard

    IEEE 802.11 a/b/g/n/ac

    Frequency Band

    Radio Ⅰ: 802.11b/g/n  2.4000~2.4835(GHz)
    Radio Ⅱ: 802.11a/n/ac  5.150~5.250(GHz), 5.250~5.350(GHz), 5.470~5.725(GHz), 5.725~5.850(GHz)

    Operation Channels

    2.4GHz : US/Canada 1-11;  2.4GHz : Europe 1-13;  2.4GHz : Japan 1-14
    5GHz : The support channel is restricted by local regulatory requirements:
    36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153,
    157, 161, 165

    Transmit Power (Maximum transmit power is limited by local  regulation)

    802.11b
    27.5dBm@ 1Mbps
    27.5dBm@ 11Mbps
    802.11g
    27.5dBm@ 6Mbps
    23.5dBm@ 54Mbps
    802.11n(2.4G)
    27.5dBm@ MCS0 (HT20/40)
    22.5dBm@ MCS7 (HT20/40)

    802.11a
    26.5dBm@ 6Mbps
    22.5dBm@ 54Mbps
    802.11a/n(5G)
    27.5dBm@ MCS0/MCS8 (HT20/40)
    22.5dBm@ MCS7/MCS15 (HT20/40)
    802.11ac
    27.5dBm@ MCS0 (VHT20/40/80)
    22.5dBm@ MCS7 (VHT20/40/80)
    19.5dBm@ MCS9 (VHT20/40/80)

    Receiver Sensitivity
    (Typical)

    802.11b
    -93dBm@ 1Mbps
    -85dBm@ 11Mbps
    802.11g
    -86dBm@ 6Mbps
    -72dBm@ 54Mbps
    802.11n(2.4G)
    -83dBm@ MCS0 (HT20/40)
    -66dBm@ MCS7 (HT20/40)

    802.11a
    -90dBm@ 6Mbps
    -74dBm@ 54Mbps
    802.11a/n(5G)
    -90dBm@ MCS0 (HT20)
    -70dBm@ MCS7 (HT20)
    -87dBm@ MCS0 (HT40)
    -68dBm@ MCS7 (HT40)
    802.11ac
    -84dBm@ MCS0 (VHT20/40/80)
    -58dBm@ MCS9 (VHT40/80)

     

    SOFTWARE SPECIFICATIONS


    Operation Mode

    Access Point / WDS Bridge / WDS Access Point

    Multiple BSSID

    Total 32 (16 for 2.4G, 16 for 5G)

    VLANs

    SSID and Ethernet port based Tag/Untag 
    (VID=1~4094)

    Wireless

    Wireless Mode : 11 a/11b/11g/11n/11ac
    Channel selection (Setting varies by country)
    Channel bandwidth (Auto, 20MHz, 40MHz, 80MHz)
    Transmission Rate :
    2.4GHz : 11b, 11g, 11b/g, 11g/n, 11/b/g/n
    5GHz : 11a, 11a/n, 11a/n/ac

    Pass-through

    Support IPv6 and VPN Pass-through

    QoS

    WMM, Max Associated Station Number

    WPS

    Software

    Security

    WEP Encryption – 64/128 bit
    WPA Personal (WPA-PSK using TKIP or AES)
    WPA Enterprise (WPA-EAP using TKIP or AES)
    802.1x Authenticator : MD5/TLS/TTLS/PEAP
    EAP-FAST, EAP-SIM, MAC Authentication
    SSID Broadcast enable / disable
    256 WLAN MAC Address Filter
    WLAN L2 isolation (AP mode)
    Wireless STA (Client) connected list

    MANAGEMENT


    Tx Power Control

    Adjust transmit power by 10, 25, 50, 75, 90, 100%  

    Configuration

    Web-based configuration HTTP/HTTPS/SSH/CLI

    Firmware

    Upgrade via WEB, CLI, USB and FTP.

    SNMP

    v1, v2c, v3. MIB II, IEEE802.11MIB, BridgeMIB, Interface MIB, Private MIB

    Auto-Channel

    Automatically selecting lease congested channel

    Backup & Restore

    Save & Restore settings through management interfaces and USB memory stick.

    CLI

    Support Command Line Interface

    Power Saving

    Support ARP Proxy for connected wireless client

    ADVANCED FEATURES

    1.  Power Saving:
      ARP Proxy can help to save connected wireless client’s battery by being a proxy to reply the ARP request from LAN side.
    2.  VLAN Tagging:
      VLAN tagging per SSID and Ethernet port which also works in WDS interfaces.
    3.  High Speed Hand-Over between Access Points:
      With optimized PMK-Caching, the hand-over speed of mobile clients between access points can be highly improved.
    4.  Smooth Site Survey:
      Minimal ping and throughput loss during site survey procedure, producing stability for wireless connections in the local

    network environment. 

    1.  WMM QoS Mapping:
      Configurable Wi-Fi Multimedia (WMM) parameters for better network traffic management.
    2.  Advanced Qos Management & Traffic Shaping
      Traffic priority can be arranged and managed by SSID, MAC address, port and IP address.
    3.  Load Balance:
      Maximum number of users can be adjusted for each SSID.

    ENVIRONMENT & PHYSICAL


    Temperature Range

    Use PoE Switch:
    Operation : 0 to 50℃ (32℉ to 122℉)
    Storage : -20 to 60℃ (-4℉ to 140℉)
    Use Power Adapter:
    Operation : 0 to 40℃ (32℉ to 104℉)
    Storage : -20 to 60℃ (-4℉ to 140℉)

    Humidity

    90% or less – Operating, 90% or less - Storage

    Certifications

    FCC, CE

    Dimensions

    183.3(L) x 183.3(W) x 36(H)mm

    Weight

    560g (with Antennas)

    Package Content

    1 x EW-7679WAC Access Point
    3 x External Dipole Detachable 2dBi Dual Band Antenna
    1 x Power Adapter (12V / 4A)
    1 x Power cord
    2 x Mounting Bracket
    1 x Wall Mount Screws Kit
    1 x Ethernet Cable
    1 x Quick Installation Guide

Acelink is your best solution. contact@acelink.com.tw