Switch

PE-2500IPB

2.5 Giga Ethernet PoE injector(60W)

  • Support IEEE802.3 af/at/bt and 60W ultra power.
  • Automatically discover the connection of PD device and immediately sends power to it.
  • Adds PoE capability to a non-PoE Ethernet switch or router.
  • Delivers power and data to PoE devices up to 100 meters (328 feet) over a single Ethernet cable.
  • 2x 2.5 Giga Ethernet Ports, RJ45
  • Data port: The port is package traffic only
  • Data/PoE port: The port is package traffic with PoE out.
  • Maximum output :60W per each port
  • Metal case.
  • Reduces installation and equipment costs.
  • Easy plug-and-play desktop or wall-mounted installation. 
  • Operation temperature : 0~40 ℃ ,  Storage : -40 ~ 70℃.
Inquiry

Higher Cost Efficiency and Easy Installation

Because of adding the capability of IEEE 802.3 af/at/bt Power over Ethernet to a non-PoE Ethernet switch or router, the PE-2500IPB can directly be connected to any PoE end-nodes such as PTZ (Pan, Tilt, Zoom) network cameras, PTZ speed dome, color touch-screen Voice over IP (VoIP) telephones and multi-channel wireless LAN access points where the IEEE 802.3 af/at/bt in-line Power over Ethernet port is supported.











​If the terminal device does not support PoE, it can also be used with a PoE splitter.
HARDWARE
Controller
PD69200+PD69204T4
HW Feature
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3ab 1000BASE-T
IEEE802.3bz 2.5Gbase-T
IEEE802.3at, IEEE802.3af
Memory
-
Interface
2x 2.5 Giga Ethernet Ports, RJ45
​ -1. Data port: The port is package traffic only
 -2. Data/PoE port: The port is package traffic with PoE out
LED Indicator
PWR: Green LED
- Off: power off or fail
- On: power on
PoE LED: 
- Off: PoE power output off
- Green on: PoE power output on
Power
Maximum output :60W per each port
Power Saving
-
Install
indoor
Housing
metal
Dimension
154x73x36mm