Enterprise WiFi

A10

VoIP WiFi Adapter

  • Bring VoIP signal over wireless
  • Supports SIP v2.0 standard (RFC3261)
  • Supports 2.4GHz 802.11b/g/n 2T2R WiFi
  • Supports 1 x RJ11 FXS port for phone and 1 x RJ45 LAN port
  • Register up to 4 SIP accounts mixable simultaneously
  • Miniaturized size and streamlined groove design
  • Easy to carry and configure whereever you are
  • VPN encryption protect the content of the call
  • Managed by TR069/Telnet/SNMP/Ping detect
VoIP
WiFi 4
N300
Inquiry

VoIP + WIFI Router , support up to  4 SIP accounts

FXS VoIP Gateway and WIFI router , flexible registration for different VoIP Route plan.
 

Scalability

Unlike the complex hardware settings of traditional extension systems, adding and removing VoIP users usually only requires software settings to take effect.
  

Reduce construction cost

You can make calls through the soft phone, which can save the cost of office equipment procurement and phone installation and maintenance
  

Supports multiple devices

Supports multiple devices computer, smartphone, dedicated desk phone, or even a conference phone for meeting rooms, VoIP can provide services.
 

Full VoIP & NAT  functionality

In terms of bandwidth, A10 supports G.711(packet size 64K) to G.729(8K)
In terms of system integration, NAT Traversal can be supported under the current system (through outbound proxy/STUN).
 

Supports TR069, SNMP and other protocols

The VoIP WiFi Adapter rovides a variety of means for local configuration, remote maintenance and centralized management of equipment, and provides complete functions such as diagnosis and alarm.
 

Suitable for home and office environment

Only need power outlet and WiFi environment to use the VoIP WiFi Adapter.



 
Specification
Model name
A10
Ethernet Ports
1(RJ45)
Line port
1(RJ11) for FXS
Specification
Main Chipset
Realtek RTL8197FS , 2.4G(B/G/N) 2T2R
miSLIC
Microchip LE9643
Frequency Band
2.4000~2.4835GHz
Frequency Band
11b: 1/2/5.5/11Mbps
11g: 6/9/12/24/36/48/54Mbps
11n (20MHz): MCS0-15, up to 144Mbps
11n (40MHz): MCS0-15, up to 300Mbps 
Security
WEP 64/128, WPA, WPA2
Antenna
Internal PiFa Antenna x 2 (2T2R)
Features
Wireless
SSID config/channel bandwidth/control sideband/channel number/Broadcast SSID Security/Access control/Site Survey/
VPN
Client/server
PPTP/L2TP/IPSec
VLAN
802.1Q VLAN
Firewall
NAT(Router/Repeater/Client mode)/NAT-T/STUN/Bandwidth control/IP QoS/DoS prevention
Management
Web Interface Management
WAN IP configure can be programmed by phone with IVR prompt
Support Auto Provision Server
Remote configuration/Upgrade by Web UI or Auto Provision Server
Exportable CDR to CDR server
Support TR-069
VoIP
VoiP Processing
Audio CODEC : G.711 a-law/u-law,G.726,G.729a/G.729,iLBC
Transparent pass through
G.168 echo cancellation
Carrier tone generation
Silence suppression and comfort noise
DTMF In/Out band Relay
DTMF/ Call progress detection and generation
Support Caller ID (FSK / DTMF)
VoIP Signaling
Support SIP v2.0 standard (RFC3261)
NAT Traversal: Outbound Proxy, STUN Server
Register up to 4 Server simultaneously
Support multiple dialing plan
Adaptive Jitter Buffer function
Multiple call profile for different parameters
Route Functions
Static and dynamic IP from DHCP,PPPoE, Bridge
Build-in DHCP Server
NAT through function
Protocol: UDP, TCP, NAT, BOOTP, TFTP, FTP, HTTP, TELNET, IEEE 802.3/ IEEE 802.3u
Support SNMP, SNTP, HTTP, FTP, NAT, DNS, DDNS
NAT function: Virtual Server, Port mapping, Static routing table
QoS (ToS& DSCP) and bandwidth control, reserve bandwidth for VoIP call when data traffic busy
Fax Support
Fax/Modem Tone Detection & Discrimination, Fax/Modem pass through over G.711 / T.30
T.38 FAX Relay
Power
Power Adapter
Integrated AC 110/220V Power Adapter
Environment
Operation temperature
0~45°C
Humidity
Up to 95% (Non-Condensing)
Dimension
Width x Depth x Height
75x70x35mm